NOTTINGHAM METALWORKS — PRICING GUIDE

Metal Fabrication Prices in Nottingham

All prices below are guide prices only. Every project is individually quoted based on dimensions, design complexity, materials, finishes and installation requirements. Contact us for a free site visit and accurate quotation.

Gates

Side gates, driveway gates and automated systems — fabricated to measure in our Nottingham workshop.

SIDE / PEDESTRIAN GATE

From £800

per gate, supply and install

Single pedestrian or side access gate. Price varies with width, design complexity, material and finish. Wider openings or decorative detailing will increase cost.

DRIVEWAY GATE

From £1,700

per pair, supply and install

Double driveway gates — flat bar, box section, composite infill or timber infill. Price increases with opening width, automation prep and decorative work.

AUTOMATED GATES

Price on application

site survey required

Gate automation costs vary by gate weight, drive type, access control and power supply. Contact us to arrange a free site visit and quotation.

Railings

Bespoke steel and wrought iron railings for residential and commercial properties.

BESPOKE RAILINGS

From £180

per metre, supply and install

Fabricated to your exact specification. Price per metre is affected by railing height, infill pattern, post design and finish — powder coat, primer and paint, or hot dip galvanised.

Handrails

Interior and exterior handrails for domestic staircases, steps and commercial premises.

DOMESTIC HANDRAIL

From £150

per metre, supply and install

Straight runs on stairs or steps. Price varies with profile, fixing method, number of bends or returns, and finish. Glass infill or decorative balusters are priced separately.

COMMERCIAL HANDRAIL

Price on application

site survey required

Commercial handrail systems must comply with Building Regulations Part K. We carry out site surveys to ensure compliance and provide an accurate fixed-price quotation.

Balustrades

Steel balustrade systems for staircases, mezzanines, terraces and commercial interiors.

STEEL BALUSTRADE

From £150

per metre, supply and install

Post and infill balustrade in mild steel or stainless. Price increases with glass infill panels, cable systems or bespoke post designs. Commercial projects quoted individually.

Juliet Balconies

Bespoke Juliet balconies fabricated for French doors and floor-to-ceiling glazing.

BESPOKE JULIET BALCONY

From £600

supply and install

Standard width Juliet balcony in mild steel, primed and painted. Price increases with wider openings, stainless steel, powder coating or architectural detailing. Every unit measured and fabricated to order.

Mobile Welding

On-site MIG, TIG and MMA welding across Nottingham and the East Midlands.

MINIMUM CALL-OUT

£300

up to 4 hours on site

Covers travel, equipment and up to four hours of welding time. Suitable for smaller repair jobs, car welding, MOT repairs and short fabrication tasks.

FULL DAY ON SITE

£550

full day rate

Full day mobile welding — suited to larger on-site fabrication, structural welding or projects requiring extended time. Materials charged separately where applicable.

Workshop Fabrication

Bespoke fabrication carried out in our Nottingham workshop — sheet metal, precision parts, structural elements and more.

MINIMUM WORKSHOP JOB

From £120

minimum charge

Minimum charge applies to small workshop jobs — cutting, drilling, welding or forming. Larger projects are quoted individually based on time, materials and complexity.

What affects the final price?

▸  Overall dimensions and opening size

▸  Design complexity and decorative detailing

▸  Material specification — mild steel, stainless or wrought iron

▸  Finish — primer and paint, powder coat or hot dip galvanised

▸  Infill type — flat bar, box section, composite panels or timber

▸  Access and installation conditions on site

▸  Quantity — multiple units on the same project reduce unit cost

▸  Travel distance outside Nottingham

All prices shown are guide prices only and are intended to help you understand the likely range of costs before we visit. Every project is individually measured and quoted — the final price will reflect your exact dimensions, chosen design, materials and finish. There are no hidden charges. Your quotation will be itemised and agreed before any work begins.

Ready for a free quote?

Get in touch to arrange a free site visit. We'll measure up, discuss your options and provide a written quote with no obligation — usually within 48 hours of visiting.

Frequently Asked Questions about Metal Fabrication Pricing in Nottingham

No — site visits and quotations are completely free. If you send good photos or videos, we can use them to give you a provisional quote, so you have a realistic idea of cost before we visit. If the provisional quote is acceptable, we will visit your property, take accurate measurements and discuss your options before providing a written quote. There is no obligation to proceed.

Everything we make is bespoke. A driveway gate for a 3-metre opening in flat bar with a primer and paint finish will cost significantly less than a 5-metre set of bi-fold gates with composite infill panels and automated openers. The guide prices on this page reflect the simplest version of each product — the site visit is where we establish what your project actually requires.

Yes — for all supply and install work, materials are included in the quoted price. For mobile welding call-outs, any additional materials required on site (such as welding rod, wire or gas) are charged at cost if not already included in the agreed scope.

In most cases, no. Gates and railings under 1 metre in height adjacent to a highway, or under 2 metres elsewhere on your property, typically fall within permitted development rights and do not require planning permission. However, if your property is in a conservation area or is listed, different rules apply and permitted development rights may be restricted. We will flag anything worth checking during the site visit, but always recommend confirming with your local planning authority if you are in any doubt.

Lead times vary with current workload and project complexity. Smaller jobs such as a single gate or a short railing run are typically ready within two to three weeks of order confirmation. Larger or more complex projects may take longer — we will give you an honest estimate at the quotation stage and keep you updated throughout.

We accept bank transfer (BACS) and debit or credit card. For larger projects a deposit is required on order confirmation, with the balance due on completion. Full payment terms are outlined in your quotation before any work begins.

Yes — we cover the wider Nottinghamshire area as standard, including Beeston, West Bridgford, Carlton, Arnold, Hucknall and Long Eaton. We also take on projects further afield across the East Midlands. Mobile welding call-outs outside our standard area may incur a travel supplement — contact us to confirm coverage for your location.

Nottingham Metalworks logo

Business Hours

Mon - Sat

7:00 am - 7:00 pm

Sunday

Closed