✓ 5.0★ Google rated ✓ MIG & TIG welding ✓ Every gate made to measure ✓ Free site visits & written quotes
At Nottingham Metalworks, we fabricate and install a full range of wrought iron gates — from small front garden gates to large driveway pairs and single sliding gates. Every gate is made to measure in our Nottingham workshop and installed by the same team that built it.
The term wrought iron gate is worth clarifying before anything else. Older gates were traditionally made from wrought iron throughout — a labour-intensive and now expensive material. Most gates sold today as wrought iron are made primarily from mild steel, with decorative wrought iron components — spear tops, finials, scroll work — welded onto the steel framework. This is the most cost-effective approach and, once properly primed and painted, the finished result is visually identical to full wrought iron.
At Nottingham Metalworks we can offer both options. For most residential customers, a steel gate with wrought iron decorative tops is the right choice — it delivers the appearance of traditional ironwork at a practical price, and once the paint finish is in place the material underneath is not visible. For customers specifically requiring full wrought iron throughout, we can accommodate that — the material and welding costs are higher, but the option is available.
If you are also looking for matching metal railings to complete the boundary, we can fabricate both as a single project and ensure a consistent finish throughout.
We provide a full supply and fit service for all our wrought iron gates — we do not supply gates for self-installation. There are good reasons for this.
Managing and positioning driveway gates is a two-person job that requires the right tools and a methodical approach to measurement. The hinge positions, the fixing substrate, the slope of the ground, and the clearance arc of the gate as it opens all need to be assessed and accounted for before a single fixing goes in. If the slope of your driveway means the gate would catch the ground before fully opening, the solution — typically a rising hinge — needs to be identified at the site visit, not discovered on installation day.
We measure up at the site visit, confirm the fixing positions, account for any ground slope, and provide a written quote before any work begins. If the gate does not open and close correctly once installed, it is on us to resolve it. That is the only way we are willing to work — full accountability for the fabrication and the fit.
Buying a gate online and having it delivered for self-installation removes all of this expertise from the process. If the gate arrives and does not fit the opening accurately, or if the fixing substrate is not suitable for the specified hardware, the options are limited and costly. We would rather take full responsibility for the outcome from the start.

The topping on the vertical bars is where most of the decorative character of a wrought iron gate comes from. The bars themselves are largely structural — it is the tops that give a gate its personality and indicate the style and period it is designed to suit.
We can weld any of the following top options to the vertical bars of your gate:
The most popular approach for wrought iron gate tops is to paint the finials a contrasting colour to the main frame. Silver and gold are the most frequent choices for spear and Fleur de Lis tops — they highlight the decorative detail and give the gate a more bespoke, finished appearance without changing the fabrication cost. If your property has a rendered exterior in cream, yellow or another colour, matching the topper paint to the render is a popular alternative that ties the gate into the wider property scheme.
We will bring examples of different top profiles to the site visit so you can make a more informed choice before we fabricate.
Wrought iron driveway gates make a strong first impression — the traditional material and ornate detailing signal quality and attention to detail in a way that a composite or plain steel gate does not. For properties where kerb appeal is a priority, a well-designed pair of iron driveway gates is one of the most effective boundary investments available.
The most popular style for iron driveway gates is an arched top with spear or Fleur de Lis finials. The arch adds height to the centre of the gate, which makes the opening look grander than a straight-top alternative of the same width. For modern and contemporary properties, a straight-top design with clean vertical bars and minimal decoration gives a more restrained architectural look.
For boundary consistency, we can fabricate matching metal railings in the same bar profile and top detail as the gate — so the full frontage reads as a single scheme rather than two separate elements. This is one of the most commonly requested additions to a driveway gate project and we will always discuss it at the site visit.
If the slope of your driveway or the available swing space does not allow a hinged pair to open fully, a single sliding gate is a practical alternative — we have made single sliding iron gates up to 5 metres wide. Automation can be added to both hinged and sliding gates — let us know at the enquiry stage so we can incorporate the preparation into the fabrication.
Wrought iron driveway gates start from £1,700 per pair for standard steel with wrought iron tops, supply and install. Full wrought iron throughout is available at additional cost. For an accurate price, contact us to arrange a free site visit.
This is the most common question we are asked at the site visit, and the honest answer is that for most residential gates, steel with wrought iron decorative tops is the better choice.
Wrought iron throughout:
Mild steel with wrought iron tops:
The practical conclusion: if a steel gate is properly primed before painting and the finish is maintained — touching up any paint chips promptly — it will provide a gate that performs as well as wrought iron for the vast majority of residential applications. The price difference is meaningful, and the visual result is the same once painted.
Full wrought iron throughout is available for customers who specifically require it. We will advise on both options at the site visit and give you an honest assessment of which suits your budget and requirements.
Wrought iron gates are often part of a wider property metalwork project. We fabricate everything in our own workshop, which means we can match gates, railings, handrails and balustrades to the same profile, finish and colour throughout.
→ Metal Gates — from £800, supply and install
→ Steel Balustrades — from £150 per metre, supply and install
→ Outdoor Metal Handrails → /metal-handrails] — from £150 per metre, supply and install
→ Metal Juliet Balconies — from £600, supply and install
If you are combining railings with a gate or handrail on the same project, contact us and we will quote the full scope together.
For a bespoke iron gate we can provide the perfect solution.
We'll measure up, make and install - all you need to do is choose the design!

© 2026 All Rights Reserved | Nottingham Metalworks

Mon - Sat
7:00 am - 7:00 pm
Sunday
Closed